Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Sweep for Concord Homeowners
Homes in Concord sit in a mild, inland Contra Costa climate with hot, dry summers and cool, damp winters. That mix means a wood-burning fireplace gets used in short, intense bursts, and it builds creosote in layers – a tarry, flammable residue that starts chimney fires. The damp stretch feeds moisture problems in masonry and caps. We answer 24/7, and our technicians have up to experience cleaning, inspecting, and repairing flues and fireboxes. We sweep first, show you the camera evidence, and only then recommend work. Call (833) 434-1221.
Chimney Sweep Services
Chimney Sweep Services from Stallion Chimney Sweep cover the full sweep-and-repair scope under one team, so you don’t source a second contractor after a problem turns up. You need a sweep when the flue has a quarter-inch of soot or creosote, when you’ve burned a season’s worth of wood, or before you list the house or move in. We brush and vacuum the flue top to bottom, inspect for cracks and gaps, and hand you the findings in writing. The same crew sweeps, inspects, and repairs, so a cracked flue gets diagnosed and fixed without a hand-off. Whether it’s a fireplace in Concord, a wood stove, or a gas insert, we match the tool to the flue.
Pleasant Hill homeowners can also book a chimney sweep through the same team.
Standard Flue Sweep
The standard sweep brushes the full length of the flue, clears the smoke shelf and damper, and vacuums the firebox and hearth. We run a camera up the flue and photograph the interior so you see the soot level and any cracks yourself. Wood-burning flues with heavy glaze creosote get a slower pass so the deposit lifts instead of smearing.

Wood Stove and Insert Sweeping
A freestanding stove or insert routes differently from a fireplace, so we disconnect the flue pipe where the manufacturer allows it, sweep the full run, and reseal the joints on reassembly. We check the baffle, the gasket, and the connections while the stove is open. Inserts come out far enough to reach the flue and the block-off plate above it.

Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cleaning
Chimney Cleaning is the deeper service: a full flue and firebox clean plus a documented inspection, not a quick brush from the roof with a shop vac. You need it when smoke backs up into the room, when the flue smells of creosote on warm days, or when you haven’t had a clean in a season or two of burning. We vacuum the firebox, clear the smoke chamber and shelf, and bag the soot so nothing drifts into your living room. Cleaning is done indoors with a sealed vacuum and drop cloths, so floors and furniture stay clean. Whether you’re near Clayton or closer to the water, the crew arrives with a camera and photo report, not just a broom and an upsell list.
Creosote Removal
Creosote comes in three grades: soot flake you can brush out, a hard black crust, and glassy glaze that resists sweeping. We identify the grade from the camera image and use the technique that lifts that layer instead of polishing it. Glaze usually takes more passes and a chemical conditioner to break it down first.
Camera Inspection and Photo Report
We run a color camera up the flue, down the chimney crown, and into the smoke chamber, then photograph what we see. That’s how you verify a recommendation instead of taking it on faith. The photo report travels with the written estimate, so a cracked tile or a missing cap shows as a picture, not a line item.
Fireplace Cleaning
Fireplace Cleaning is the work that reaches the parts the flue sweep doesn’t: the firebox walls, the damper blade and frame, the brick hearth, and the smoke shelf above the damper. You need it when soot streaks the firebox, when ash has built up past the shallow pan, or when a fire has left a heavy black film on the facing. We scrape and vacuum the firebox, test the damper for free movement, and wipe down the surround, with the creosote and ash removed from the room. That deep clean leaves a fireplace clean enough to inspect and photograph properly, with a clean camera image rather than a sooty one.
Damper Inspection
A damper that sticks open wastes heat up the flue; one that jams shut lets smoke fill the room. We test the blade, the frame, and the hinge while the firebox is open and clear any soot or rust that’s binding it. If the damper needs repair, that’s noted in the report so the clean and fix happen in one visit.
Ash and Soot Removal
Ash left over the firebox floor keeps moisture against the brick and can eat into the firebrick joints over a season of use. We remove it with a sealed vacuum and dispose of it properly, then examine the burn pattern on the brick before it’s cleaned. That’s also where we spot a warped grate or a cracked fireback before it gets worse.
Chimney Services
Chimney Services from Stallion Chimney Sweep cover everything the sweep turns up: relining, masonry repair, caps, venting, and waterproofing. You need them when an inspection flags a gap, a cracked crown, a cap that’s rusted out, or a flue that’s no longer the right size for the appliance. We handle inspection, cleaning, and repair under one roof, so a repair found on the sweep is scheduled and completed by the same crew. Where a flue is cracked but still structurally sound, HeatShield ceramic resurfacing restores the interior without a full liner demo. Where the flue needs relining, we install DuraFlex flexible stainless steel liner for wood, gas, and oil systems. Caps and vents come from Gelco and Olympia Chimney so the top of the chimney weathers as long as the liner inside it.
Liner and Relining
A stainless liner is sized to the appliance, insulated to code where required, and sealed top and bottom. DuraFlex flexible liner installs through the flue and handles the offset and bend a rigid liner can’t. We size the liner to the appliance so draft stays right.

Caps and Venting
A missing or rusted cap lets rain, leaves, and birds into the flue, and that means a wet flue and a clogged screen. We fit Gelco and Olympia Chimney caps rated for exterior weathering, and we source venting components from Famco and Copperfield suppliers who serve the trade. Each cap is fitted to the flue size after a measurement, not guessed from the roof.
Chimney Sweep Certified
Chimney Sweep Certified means the sweep works to the industry’s inspection and cleaning standards, with the tools and documentation to back it, rather than a broom and a glance. You need that level of rigor any time an inspection finding will drive a repair recommendation, because a look from the roof won’t show a cracked tile ten feet down the flue. Our technicians have up to experience and clean, inspect, and repair to the same standard on every job. The photo report and the written estimate are part of the standard, not an add-on, and they carry the evidence you need to decide whether to repair now or wait. Cleaning and inspection together keep a Concord flue on a workable maintenance cycle.
Standards and Method
Certified work means an inspection to the standard levels, a clean sweep that removes the deposit rather than redistributing it, and a report you can read. We document what level of inspection the job required and why, using the flue-camera image as the basis. The point is a result you can verify, not a badge on a shirt.
Documentation You Keep
You get the photo report and written findings, formatted so a future owner or insurer can read them. Photos are labeled to the location in the flue, the appliance, and the cap. The paperwork is part of the job, so it stays with the house.
Gas Fireplace Cleaning
Gas Fireplace Cleaning is separate from a wood flue sweep: a gas unit produces little creosote but does build dust, cobwebs, and debris in the air intake and around the burners. You need it when the flame turns yellow or lopsided, when the glass frosts over, or when the logs show soot where they shouldn’t. We remove the logs and glass, clean the burners and intake, check the venting draft, and reassemble, and we leave the gas line itself to a licensed gas fitter because that component is genuinely dangerous in untrained hands. That means the cleaning and inspection happen on the same visit, and any venting issue is documented before we leave.
Burner and Log Cleaning
Dust and lint on the burner ports change the flame shape and can leave a soot film on the logs. We brush the burner ports clean, wipe the logs, and inspect the assembly for cracks. A clean burner draw gives an even flame and a safer burn.
Venting Check
Gas vents need a clear path and correct draft. We check the vent termination, the draft hood, and the surrounding intake for blockages and confirm the exhaust is pulling. Any vent pipe that is loose, cracked, or the wrong type is flagged in the report.
Chimney Maintenance
Chimney Maintenance is the routine that keeps a Concord chimney from becoming a repair job: an annual sweep and inspection, a cap and crown check, and a look at the flashing where the chimney meets the roof. You need it each year before burning season, and again after a wet winter, when water has had a chance to work into masonry joints. Our maintenance visits include the flue-camera inspection, so the same photo record builds from year to year and a small crack shows before it spreads. We handle the sweep, the inspection, and any repair in one stop, so a flashing leak or a loose crown doesn’t wait for a second contractor to call back.
Annual Inspection Cycle
One sweep and inspection a year is the baseline for a fireplace used through the cool season. We track the flue condition year to year and note any change – a widening crack, a shifting cap, a thinning crown. That record is what tells you whether a repair can wait.
Water and Masonry Protection
Water is the main destroyer of masonry chimneys in this climate. We check the crown, the flashing, and the brick joints, and we recommend a masonry waterproofing coat where the brick is taking on water. A sealed crown and a tight flashing line cut the moisture that drives spalling.
Brands We Service
We work with the professional-grade product lines that certified chimney technicians specify, not the consumer-grade parts on a hardware-store shelf. Gelco caps are fitted to the flue size and chosen for the weathering a Contra Costa rooftop actually sees, so the top of the chimney outlasts the liner below it. Olympia Chimney components and Famco venting set the standard for the connections that carry a wood, gas, or pellet appliance, and we match those parts to the appliance’s draft needs instead of guessing.
DuraFlex flexible stainless liner is the system we install for relining, because it handles a flue offset without pinching the draft. HeatShield ceramic resurfacing is the product we use to restore a cracked flue interior where the structure is sound, so a liner replacement can be avoided in qualifying cases. We source through Olympia Chimney and Copperfield, the suppliers career chimney professionals rely on. Whether you have Gelco, Olympia Chimney, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Heavy black creosote on the flue walls. Glaze creosote is the fuel a chimney fire feeds on, and it doesn’t brush off like soot. If you can see a glossy, tar-like coating when you shine a light up the flue, that’s the time to book a sweep, before the next burn.
- Smoke rolling back into the room. Back-draft usually means a blocked flue, a closed or stuck damper, or a flue that’s too small for the appliance. It also means combustion gases are going where you’re sitting, so it’s worth diagnosing soon.
- A strong creosote smell on warm days. That odor is the deposit off-gassing when the chimney warms up, and it often tracks a creosote buildup that hasn’t been cleaned out. The smell itself isn’t the hazard; the glaze behind it is what needs the sweep.
- Water stains or efflorescence on the firebox or exterior brick. White staining and damp patches point to water getting past the crown, the flashing, or the cap. Left alone, water works into the masonry and can crack the flue tile.
- Rust or a sagging cap and screen. Rusted caps and torn screens let in rain and nesting birds, and both cut draft and add moisture. A cap is one of the easier chimney repairs to handle before it turns into a water problem.
Our Process, Step by Step
- 1
Book the sweep and confirm the scope. We take the appointment, ask what you burn and how often, and note any smoke or odor issues. That tells us what to bring and how the sweep should be set up before we arrive.
- 2
Protect the room and set up. Drop cloths go down, the vacuum is sealed to the firebox, and the flue is opened top and bottom. This is why soot doesn’t end up on the carpet or the furniture.
- 3
Sweep the full flue and firebox. We brush the flue from the top, clear the smoke shelf and damper, and vacuum the firebox and hearth. Soot and creosote come out of the house rather than off the roof.
- 4
Run the camera and photograph the findings. We send a color camera up the flue, down the crown, and into the smoke chamber. The images label what’s cracked, what’s missing, and what’s fine – your evidence, not our word.
- 5
Write the estimate and agree on next steps. Anything found is priced on a written estimate, with the difference between fix-now and safe-to-wait spelled out. Nothing is recommended without the camera image to show you why.
How Much Does Chimney Sweep Cost in Concord?
A typical chimney sweep in Concord runs $150-$300 depending on the flue size and how heavily it’s loaded with soot, and an inspection plus sweep together commonly lands in the $200-$400 range. Fireplace cleaning and shallow firebox work in the $120-$250 range when the flue itself doesn’t need a full sweep. Gas fireplace cleaning is often the smaller job, typically $120-$225, because there’s little creosote to remove. Repair work is priced separately after the inspection, on a written estimate, so you’re never asked to approve a larger job sight unseen.
What moves the price is the flue run length, the creosote grade, roof access, and whether the job includes a camera inspection and written report. Avoiding overpaying is mostly a matter of getting the findings in writing with photos attached, and asking whether each line item is urgent or can wait. Our free estimate covers the sweep scope and any repair seen in the camera image, and the written estimate sets the final price. Nothing in the report is a guess.
Our Service Area Near Concord
We serve Concord and the towns around it: Pleasant Hill, Contra Costa Centre, Clayton, Bay Point, Walnut Creek, Vine Hill, Martinez, and Pittsburg. The flatland neighborhoods and the hillside streets in this stretch of Contra Costa all see the same mild, damp winters, and the local pro travels these areas routinely. Location and scheduling are arranged by the team at booking. Homeowners closer to the county line can book a chimney sweep from the same crew.
Serving Concord, CA – Our Local Coverage Area
We serve Concord and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Sweep in Concord
A chimney sweep is a technician who cleans the soot and creosote out of a flue and firebox and checks the chimney’s condition. The sweep removes the deposit that fuels a chimney fire and blocks draft, and it includes an inspection of the flue, damper, and cap. We clean, inspect, and photograph the flue in one visit. Call (833) 434-1221 to book.
A standard sweep usually runs about an hour, and a job that includes a full inspection and photo report takes closer to 90 minutes. A heavily loaded flue, a wood stove insert, or a repair found mid-job can extend it. We’ll tell you the expected time when you book. Call (833) 434-1221 for an exact quote – estimates are free.
Expect roughly $150-$300 for a typical sweep in Concord, and $200-$400 when you add an inspection and written photo report. Gas fireplace cleaning often runs $120-$225. The written estimate sets the final price. Call (833) 434-1221 for an exact quote – estimates are free.
Yes, we service Gelco caps and Olympia Chimney components, along with the venting we source through Copperfield and Famco suppliers. We fit a cap to the flue size and check the connections when we clean. Whether you have Gelco, Olympia Chimney, or another make, we can help. Call (833) 434-1221 to schedule.
Same-day dispatch is often possible when you call early, and we answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. A call outside dispatch hours is booked into the next opening. Call (833) 434-1221.
Our installation and repair work is warrantable and documented, so you get a written record of what was installed and when. The report and estimate state the scope of the work in writing. Ask us at booking which work carries a written warranty. Call (833) 434-1221 for the details.
Clear the hearth, move anything breakable off the mantel, and don’t build a fire in the 24 hours before the visit. If the fireplace has a screen or glass door, leave it in place; we’ll handle removal. Make sure we can reach the roof if access is needed. Call (833) 434-1221 once you’re ready to book.
Schedule Your Chimney Sweep Service in Concord Today
Book a Concord sweep with Stallion Chimney Sweep and get a clean flue, a camera inspection, and a written report you can keep. Inspect first, then recommend – that’s the order, and the estimate is free with no obligation. One crew handles the sweep, the inspection, and any repair it turns up. Call (833) 434-1221. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Stallion Chimney Sweep.