Chimney Inspection in Concord, CA | Stallion Chimney Sweep

Chimney Inspection in Concord - Flat-Price Sweep, Findings in Writing

A flat-price sweep with a camera inspection and photo report included. If we find something that needs attention, you see the picture before you hear a price - and we will tell you when it can wait.

Flat price quoted before we book

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Trusted Chimney Inspection for Concord Homeowners

Most Concord homeowners call us after they notice something: a smell in the living room on a cool evening, a stain on the ceiling near the chase, or an inspector’s note from a home sale that nobody has explained. Our answer is always the same. Inspect first, then recommend. Our technicians have up to experience and work on wood-burning fireplaces, inserts, stoves, and gas appliances, and we can usually get a camera into your flue the same day you call. We tell you what we found, show you why it matters, and fix it with the right material for the job. One crew, full scope, no hand-offs. Call (833) 434-1221. We answer 24/7.

Call (833) 434-1221

Fireplace Inspection

Fireplace Inspection is the close-up look at the firebox, damper, smoke chamber, and the first stretch of flue that a fire touches most directly, and it’s what you want before the first burn of the season or after any smoke spillage into the room. Homes across Concord’s older neighborhoods sit on clay tile flues that were built decades before anyone tested how they perform with a modern insert, and those joints are exactly where we find trouble. We run a camera through the firebox and lower flue, check the damper for a tight seal, and test how the smoke shelf drafts. A fireplace inspection typically runs $150-$300 depending on how many flues and appliances are involved, and the written estimate sets the final price. If the firebox is sound, we say so and leave it alone.

What We Check in the Firebox

We look for cracked firebrick, loose mortar joints, and gaps where heat can reach framing or masonry behind the firebox. Rusted or seized dampers get flagged because a damper that won’t close lets conditioned air escape all summer. We photograph each fault so you see exactly what we see.

Draft and Smoke Spillage

A fireplace that smokes into the room usually has a draft problem, not a fire problem. We check the smoke chamber for rough, unparged surfaces that slow the rise of smoke, and confirm the flue is sized to the opening. When the diagnosis is clear, the fix is usually straightforward.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Inspection Services

Chimney Inspection Services cover the whole assembly, from the cap down to the firebox, and they’re what you need whenever you’ve bought a home, changed appliances, survived a chimney fire, or simply can’t remember the last time anyone looked. We handle inspection, sweeping, and repair in-house, so the crew that finds a problem is the crew that fixes it. Our technicians have up to experience and we work with professional-grade materials from Olympia Chimney and Copperfield, not hardware-store substitutes. Chimney inspections in Concord typically run $150-$400 depending on the level of inspection and how many flues are in the chase, with the written price agreed before we book. You get a camera inspection and a photo report with every visit.

Exterior and Crown Checks

The crown, flashing, and masonry joints take the weather year after year, and small cracks widen once water gets in and cycles through the wall. We check the cap and spark arrestor for damage and confirm the chase is shedding water where it should.

Exterior and Crown Checks

Appliance and Venting Review

Gas appliances vent differently than wood, and a flue that served a fireplace may not suit the appliance now attached to it. We confirm the venting matches the appliance and note any connector or clearance problems in the report.

Appliance and Venting Review
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (833) 434-1221

Chimney Flue Inspection

Chimney Flue Inspection is the focused look at the flue liner itself, the clay tiles or stainless liner that carries smoke and carbon monoxide up and out of the house, and it matters most when you’re using the fireplace regularly or have any gas appliance venting through the chimney. Cracks, gaps at the tile joints, and missing mortar let heat reach the surrounding wood framing and let combustion gases escape into the structure. We run a camera the full length of the flue and check that the liner is continuous and correctly sized for the appliance. A flue inspection typically runs $150-$300 as a standalone visit or as part of a fuller inspection, and the written estimate confirms the price before we start. If the liner passes, you’ll hear that plainly.

Clay Tile and Joint Condition

Older Concord homes often have clay tile liners with mortar joints that erode over time, and a gap of even a fraction of an inch matters. We record every joint we can see on camera and note which ones need attention now versus which can be watched.

Liner Sizing for the Appliance

A flue that’s too large for the appliance drafts poorly; one that’s too small backs smoke into the room. We measure the flue against the appliance’s venting needs and explain any mismatch in plain terms.

Chimney Fire

Chimney Fire damage is often invisible from the ground, and the inspection after one is what tells you whether the flue can be used again. Creosote that builds up in stages can ignite inside the flue, and the heat is intense enough to crack tiles and warp a metal liner without any flame ever reaching the room. If you’ve heard a roar, seen flames or sparks at the top, or noticed blackened paper or popped tiles, stop using the fireplace and get it looked at. Post-fire inspections typically run $250-$500 depending on the damage and the camera work required, with the written estimate setting the final price. We check the full flue for heat damage, then tell you honestly what can be restored and what needs replacing.

Signs a Fire Stayed Inside the Flue

Puffy, honeycombed creosote, discolored metal, and cracked tile are the usual evidence. A fire that burned hot and fast can leave a flue that looks fine from the top and fails a camera check at mid-height, which is why we run the camera every time.

Repair Options After a Fire

Where the tiles are cracked but the chimney structure is sound, HeatShield ceramic resurfacing can restore the flue interior without full demolition. Where the damage runs deeper, a DuraFlex stainless liner gives you a continuous new flue inside the old one.

Level 2 Chimney Inspection

Level 2 Chimney Inspection is the full read of the chimney, including all accessible portions of the flue and the attic, crawlspace, and rooftop areas where the chimney passes through the structure, and it’s the level you need for a home purchase, an appliance change, or after any chimney fire. It goes beyond what you can see from the firebox, and it’s the inspection real estate transactions and insurers usually expect. We use a camera through the full flue and document the chase, crown, flashing, and clearances to combustibles. In Concord, a Level 2 inspection typically runs $250-$450 depending on roof access, chimney height, and how many flues are in the chase. The written estimate fixes the price before we schedule, and the photo report is yours to keep.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (833) 434-1221

When a Level 2 Is Required

Buying or selling a home, switching fuel types, installing a new insert or stove, or recovering from a chimney fire all call for this level. If you’ve had an earthquake or a major storm since the last inspection, it’s worth booking as well.

What the Report Shows You

You get photographs of every defect we find, labeled by location, plus a plain-language summary of what needs fixing now and what can wait. Nothing gets recommended without camera evidence you can see for yourself.

Chimney Leak

Chimney Leak problems show up as water stains on the ceiling or the chimney breast, crumbling mortar on the exterior, or a damp smell in the firebox after rain, and the source is almost never where the stain appears. Water gets in at the crown, the flashing where the chimney meets the roof, the masonry joints, or a missing or damaged cap. Left alone, that moisture breaks down mortar and can rust a metal liner or firebox assembly from the inside out. A leak inspection and diagnosis typically runs $150-$350 depending on access and whether we need to check from the roof. We find the entry point, show you the evidence, and repair it with the right materials, including Gelco caps and proper flashing work.

Common Entry Points

A cracked crown is the most common culprit, followed by failed flashing at the roof line and open mortar joints on the stack. A cap that’s missing, rusted through, or the wrong size lets rain straight down the flue.

Fixing It at the Source

Sealing over a stain inside the house does nothing. We repair the crown, reflash the chimney, repoint the joints, or fit a correctly sized Gelco cap, then confirm the fix holds before we close the job.

Chimney Camera Inspection

Chimney Camera Inspection is the video look inside the flue that shows what no flashlight from the firebox can reach, and we run one on every inspection we do because the middle and upper sections are where most hidden damage sits. A camera lets us see cracked tiles, gaps at joints, heavy creosote glaze, obstructions like nests or fallen masonry, and the condition of any existing liner. We record the run so you can watch it yourself, not just take our word for it. A camera inspection is included in our standard inspection pricing, which typically runs $150-$400 depending on the level and flue count, and the written estimate sets the final price. The footage is the reason our recommendations hold up.

What the Camera Reveals

Hairline cracks, offset tiles, and missing mortar between joints all show clearly on video. So do the things you can’t see any other way: a birds’ nest halfway up, a collapsed tile section, or a liner that was installed without proper connections.

Why We Record the Run

The recording is yours to review, share with a second opinion, or hand to a buyer or insurer. Showing the evidence is how we avoid the guesswork that leads to unnecessary repairs.

Brands We Service

We work with DuraFlex flexible stainless steel liner systems and know where the connections and supports matter most on a reline. HeatShield ceramic resurfacing is a patented system we use to restore cracked or deteriorating flue interiors in qualifying cases, and we understand which conditions make it the right call versus when a full liner is the honest answer.

We service Gelco and Famco chimney caps and ventilation components and know how their weathering holds up on an exposed stack, plus venting from Olympia Chimney and Copperfield that career chimney professionals specify. Whether you have DuraFlex, HeatShield, Gelco, Famco, Olympia Chimney, Copperfield, or any other make, we can help.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Want to talk it through?Free estimate, price agreed before work starts
Call (833) 434-1221

Signs You Need a Pro Right Now

  • Smoke coming back into the room. A fireplace that spills smoke when you open the glass doors or light a fire is telling you the draft has failed somewhere. It might be a blocked flue, a sizing mismatch, or a smoke chamber that needs work, and a camera run finds which.
  • A strong creosote smell in warm weather. That tar-like odor on a hot day means creosote has built up in the flue and is off-gassing. Heavy creosote is what feeds a chimney fire, so it’s worth a look before burn season.
  • Water stains or a damp firebox. Staining on the ceiling near the chase or moisture inside the firebox points to a leak at the crown, flashing, or cap. Water breaks down masonry and rusts metal, so the sooner it’s found the cheaper the fix.
  • Visible cracks in the firebox or flue tiles. Cracks let heat and gases reach framing and masonry, and they widen with every fire. A camera inspection confirms how far the damage runs and whether resurfacing or a liner is the answer.
  • You just bought the house or changed appliances. A new insert, a fuel conversion, or a recent purchase all call for a Level 2 inspection. You’ll want to know what you own before you burn in it.

Our Process, Step by Step

  1. 1
    Book the visit with a flat price agreed first. We quote the inspection by level and flue count over the phone, confirm it in writing, and schedule around your day. You know the price before anyone arrives.
  2. 2
    Protect the room and start from the firebox. Drop cloths go down, and we begin with the firebox, damper, and smoke chamber. That first pass tells us how the fireplace is actually being used and where to focus the camera.
  3. 3
    Run the camera the full length of the flue. We record the entire run, checking tile joints, liner condition, and any obstructions, then move to the roof, cap, crown, and flashing. Attic and crawlspace checks confirm clearances to combustibles where the chimney passes through.
  4. 4
    Review the findings with you, evidence in hand. We show the footage and photos, explain what each defect means, and separate what needs fixing now from what can safely wait. Nothing gets recommended without camera evidence you can see.
  5. 5
    Repair in-house with professional-grade materials. If work is needed, the same crew handles it, using DuraFlex liners, HeatShield resurfacing, or Gelco and Famco components as the job calls for. No separate contractor to source, no conflicting diagnoses, and the work is documented when we close it out.

How Much Does Chimney Inspection Cost in Concord?

Chimney inspection in Concord typically runs $150-$400, and the level of inspection and the number of flues drive most of that spread. A basic visual inspection of one fireplace usually sits at the lower end. A Level 2 inspection with full camera work, roof access, and a written photo report runs higher, usually $250-$450. A post-fire inspection, where we need to document heat damage thoroughly, typically runs $250-$500. These are typical ranges, and the written estimate you get before booking sets the final price.

What affects the price: roof pitch and height, how many flues and appliances are in the chase, whether an insert or stove sits in the firebox, and how much camera work the condition of the flue demands. A straightforward single-flue home is quick. A chase with three flues and a gas appliance takes longer and costs more.

How to avoid overpaying: get the scope in writing before anyone climbs up, and ask whether the camera report is included or an add-on. If someone recommends a liner or major masonry work without showing you footage, get a second look. We tell you plainly when work can safely wait.

What’s included in a free estimate: the assessment, the camera run, the photo report, and a written price for any repair we recommend. No trip charge, no fee to come out, and no pressure to book work the same visit. Call (833) 434-1221 for an exact quote; estimates are free.

Need a price for your chimney cleaning?Free estimate, price agreed before work starts
Call (833) 434-1221

Our Service Area Near Concord

We serve homeowners across Concord and the surrounding East Bay communities, including Pleasant Hill, Contra Costa Centre, Clayton, Bay Point, Walnut Creek, Vine Hill, Martinez, Pittsburg, and Saranap. Dispatch runs Sunday through Friday, 7am to 7pm, and nearby cities are typically reached quickly once a visit is booked. If you’re in Pleasant Hill or Contra Costa Centre, we’re right around the corner, and we cover the rest of the Concord area just as readily. Wherever you are in the region, the process is the same: book a visit with a flat price agreed first, get the camera report, and decide from there.

Serving Concord, CA – Our Local Coverage Area

We serve Concord and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions About Chimney Inspection in Concord

Schedule Your Chimney Inspection Service in Concord Today

Book a chimney inspection with Stallion Chimney Sweep and you’ll get a camera report, a plain-language explanation of what we found, and a written price for any repair. One crew handles the sweep, the inspection, and the repair, so nothing gets handed off. Call (833) 434-1221. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free and there’s no obligation.

Written by the team at Stallion Chimney Sweep.

Why Concord Chooses Stallion Chimney Sweep

We set the standard for chimney inspection in Concord.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Concord

Getting your chimney inspection project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney inspection project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney inspection pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Concord Customers Say

Trusted by homeowners across Concord and surrounding areas.

★★★★★

"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."

Heather Ackerman
★★★★★

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

Hector Flores
★★★★★

"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."

Yolanda Garcia

Ready for Chimney Inspection in Concord?

Call now for a free estimate, or request one below. Licensed, insured, and ready to schedule your free estimate in Concord.

(833) 434-1221

Request a Free Estimate in Concord

Tell us about your chimney inspection needs. We'll get back to you to set up your free estimate.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - We Answer 24/7