Chimney Cap & Crown Cost in Concord - What It Actually Costs, Explained

Honest local price ranges, and a straight explanation of why chimney quotes vary so wildly. We will also tell you when the work being pushed on you is not actually needed yet.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (833) 434-1221

Flat price quoted before we book

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Estimates 💲 Upfront Pricing · Free Estimates
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate
Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (833) 434-1221

How Much Does Chimney Cap & Crown Cost in Concord?

Chimney cap installation in Concord typically runs $220 to $650, and a crown rebuild usually runs $650 to $1,900. A single job that covers both, done at the same visit, commonly lands somewhere between $900 and $2,400 depending on the size of the chimney, the material you choose, and how much of the old crown has to come off. The written estimate sets the final price, and there’s no charge for that estimate.

Concord’s dry summers and mild, wet winters work on a chimney top in a slow, steady way rather than a dramatic one. What fails first is almost always the crown – the concrete cap at the very top – and the cap that sits on top of it. We inspect before we recommend, so you’ll know which one is actually the problem and which one can wait a season.

Key Takeaways

  • Cap installation: $220 to $650. Crown rebuild: $650 to $1,900. Both in one visit: $900 to $2,400.
  • A stainless cap or one built from Gelco or Famco components outlasts a big-box unit in this climate.
  • The crown is concrete over masonry. It cracks when the top of the chimney moves through wet and dry seasons, so a small hairline and a crumbling slab are different jobs at different prices.
  • We use HeatShield ceramic resurfacing where a flue liner is cracked but not beyond saving, which can keep a crown repair from turning into a full reline.
  • Estimates are free, and we tell you what we found before we quote the repair.

Chimney Cap & Crown Cost Breakdown (2026)

Every price below is a typical estimate for the Concord market in 2026, not a fixed rate. Your written estimate is the number that counts, and it’s set per job once we’ve seen the top of your chimney.

Line Item Typical Estimate
Single-flue cap, galvanized or basic stainless $220 – $350
Single-flue cap, professional-grade stainless (Gelco, Famco) $280 – $450
Multi-flue cap (two to four flues) $400 – $650
Custom cap for an odd flue size or shape $450 – $800
Full crown rebuild, standard masonry chimney $650 – $1,200
Oversized or complex crown (wide footprint, multiple flues) $1,200 – $1,900
Crown crack sealing (minor, isolated cracks) $150 – $350
Flue resurfacing with HeatShield, added to crown work $450 – $1,100
Cap and crown together, same visit $900 – $2,400

What pushes the number up is mostly the crown: how much old concrete has to be broken off, whether rebar has rusted and expanded the slab, and whether the flue tile liner has also cracked and needs resurfacing before a new crown goes on. What keeps it down is a crown that can be sealed rather than rebuilt, or a cap that drops onto a standard size flue with no adapters needed.

The materials we install come from professional-grade suppliers like Olympia Chimney and Copperfield, not consumer retailers. A cap you pick up at a hardware store in Concord will fit; the question is how it holds up to a decade of summer sun and winter rain before the powder coating gives out. That’s the difference you’re paying for.

Want to talk it through?Free estimate, price agreed before work starts
Call (833) 434-1221

What Affects Chimney Cap & Crown Pricing in Concord

  • The size and shape of your chimney top. A single small flue under a standard cap is the simplest and least expensive job. A wide masonry top with two or three flues and a chimney shared with a fireplace below means more cap and a bigger crown surface to finish.
  • Cap material and construction. Galvanized steel is the entry point. Stainless with a decent coating sits higher. Custom caps fabricated to a measurement sit higher again.
  • Condition of the crown when we get there. A crown with one hairline crack gets sealed. A crown where the concrete is crumbling, or where the top of the flue tile is exposed and the crown can’t shed water anymore, gets rebuilt. Those are very different jobs.
  • Access and roof pitch. Concord’s homes vary a lot in roof design. A steep pitch, a low chimney, or a roof edge close to a neighbor’s fence adds time and setup, and that shows up in the estimate.
  • Flue condition underneath. If we find a cracked flue liner during the inspection, that’s a repair in its own right, and we’d rather quote it upfront than discover it halfway through a crown job. HeatShield ceramic resurfacing restores a deteriorating liner in cases where a full reline isn’t needed.
  • Chimney height and flue arrangement. Heights above the roofline, and the number of flues in one stack, change how the cap is built and how much material the crown takes.

The wider the gap between bids you get, the more worth it is to understand what’s in each one. A low bid that installs a thin stamped cap and a skim coat of mortar isn’t the same job as one that rebuilds the crown to shed water and sets a cap rated for the long haul.

Cap or Crown: Which One Do You Actually Need?

This is the question that decides most of the price, and it’s worth knowing the difference before you call anyone. The crown is the concrete layer at the very top of a masonry chimney, sloped so rain runs off and away from the flue. The cap is the metal cover that sits above the flue opening to keep rain, birds, and debris out.

A cracked or crumbling crown lets water into the masonry below, where it works its way down the chimney and shows up later as a stain on the ceiling or a failing mortar joint. A missing or rusted-out cap lets water straight down the flue and gives animals an open door. Sometimes you need one, sometimes both, and sometimes the cap alone solves the immediate problem while the crown can go another season.

On a chimney with a Gas appliance, the same crown and cap rules apply. We handle caps and crowns on wood-burning, gas, and oil systems alike, so you’re not looking for a second contractor if the flue underneath needs attention too. That’s the point of keeping inspection, cleaning, and repair with one team.

How Much Does a Chimney Crown Rebuild Cost in Concord?

A typical chimney crown rebuild in Concord runs $650 to $1,900, with most standard single-flue masonry chimneys landing in the $650 to $1,200 range. The upper end covers wide chimney tops, multiple flues, and jobs where the old concrete has to be chipped off by hand and rebar repaired.

A rebuild means breaking off the failed slab, cleaning the top of the flue tiles, forming a new crown with the proper slope, and finishing it so water runs off and away. It’s masonry work, and it’s the kind of job where the finish matters as much as the concrete. A crown rebuilt flat, or one that doesn’t overhang the chimney edge, cracks again within a few seasons.

If the flue liner itself is cracked, a full reline with a DuraFlex flexible stainless steel system may be needed. That’s a bigger job at a bigger price, and we’d quote it separately so you can see both numbers and decide. Where the liner is deteriorating but still sound enough to restore, HeatShield ceramic resurfacing can be the middle path. Ask about it during the estimate.

Need a price for your chimney cleaning?Free estimate, price agreed before work starts
Call (833) 434-1221

How Much Does a Chimney Cap Cost in Concord?

A chimney cap in Concord typically costs $220 to $650 installed. Single-flue caps on standard-size flues are the lower end; multi-flue caps and custom-fabricated caps push toward the top. A stainless cap from a professional-grade line like Gelco or Famco lasts longer than a basic chain-store unit and is what we’d put on our own chimneys.

The cap does a specific job: keep rain out of the flue, keep animals and debris out, and give sparks somewhere to land that isn’t your roof. A cap with an adequate screen and a lid that overhangs the flue opening does all three. A flat or undersized lid doesn’t, and down the road the flue or the firebox pays for it.

When you book a cap install, we’ll check the crown at the same time. If it’s fine, we’ll tell you it’s fine. If it needs work, we’ll show you what we see and quote that separately, so nobody is buying a cap that sits on a crumbling top. Call Stallion Chimney Sweep to book a look.

How to Save on Chimney Cap & Crown Work in Concord

  • Combine the job. Booking the cap and crown together in one visit is less than paying for two separate trips up the roof, and the setup is shared.
  • Catch a cracked crown early. A crack that can be sealed now runs a fraction of a full rebuild. If a hairline has just appeared, seal it before the next wet season has a chance to widen it.
  • Skip the cheap cap. A $60 cap that rusts out in a few summers costs more over time than a mid-range stainless one, because you pay for installation twice.
  • Get the inspection before the quote. A proper inspection of the flue and firebox tells you what you’re dealing with and keeps you from paying for work you don’t need.
  • Ask about the liner. If the flue has a crack, restoring it with HeatShield while the crown is already off can be cheaper than coming back for it later.
  • Use the free estimate. There’s no charge to have a technician look at the top of the chimney and write a number. Call (833) 434-1221 to book one.

What Happens When You Call

We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. When you call, we’ll ask a few questions about your chimney and fireplace and then schedule a visit at a time that works for you. On the day, the technician inspects the chimney from the roof, checks the cap and the crown, and looks down the flue. Whatever they find, they show you – with photos where it helps – and explain the repair and its price in plain terms. Inspection, cleaning, and repair are all done by the same team, so there’s no hand-off to a different contractor later.

Our technicians have up to experience, and the materials we use come from the same professional-grade lines certified chimney professionals buy from. If the answer is that your crown is fine and only the cap needs replacing, we’ll say so.

FAQs – Chimney Cap & Crown Cost in Concord

How much does a chimney cap and crown cost in Concord?

A cap and crown done together in Concord typically runs $900 to $2,400. A cap alone is $220 to $650; a crown rebuild alone is $650 to $1,900. The estimate is free, so call (833) 434-1221 for an exact quote.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (833) 434-1221

Is it cheaper to repair or replace a chimney crown?

In most cases repair is cheaper: sealing minor cracks runs $150 to $350, while a full crown rebuild runs $650 to $1,900. If the crown has crumbled or the concrete is soft underfoot, sealing over it won’t hold; that’s a rebuild. We’ll show you which one you’re looking at before quoting. Call (833) 434-1221 to book an estimate.

How much does it cost to replace a chimney cap in Concord?

Chimney cap replacement in Concord usually costs between $220 and $650, with most standard single-flue caps on the lower end. Multi-flue and custom caps land toward the top of that range. Call (833) 434-1221 – estimates are free.

Can you come today?

Same-day service is often possible in Concord. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday; a call outside dispatch hours is booked into the next opening. Call (833) 434-1221 to see about today.

Is a chimney cap worth the cost?

Yes, in almost every case. A cap in the $220 to $650 range keeps rain, birds, and debris out of the flue and reduces the wear that turns into a much larger repair later. The cost is small next to a flue reline. Call (833) 434-1221 for a free evaluation.

Related Pages

If you’re just starting to sort out chimney problems, the Concord page explains how our service works in the area. You can also read about chimney cap installation and chimney crown repair for more detail on each job. A chimney inspection is often the right first step, and chimney sweeping is worth booking alongside it if the chimney hasn’t been cleaned recently. If the flue turns out to be cracked, see chimney liner repair and chimney relining. For water problems, read chimney leak repair and chimney waterproofing. Homeowners nearby can find us on the Walnut Creek, Pleasant Hill, and Pittsburg pages, and our full list of chimney repair work covers what else we handle.

Contact Us for a Free Chimney Cap & Crown Estimate

If your cap is missing or rusted, or the crown has a crack you can see from the ground, the next step is a look at the top of the chimney and a written number. Call (833) 434-1221 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We serve the Concord area with inspection, cleaning, and repair from one team, and we tell you what we found, show you why it matters, and fix it with the right material for the job.

Written by the team at Stallion Chimney Sweep.

Pricing reflects the Concord market as of 2026. Stallion Chimney Sweep offers free estimates – call (833) 434-1221.

What Our Customers Say

★★★★★ 4.8 from 5+ reviews

"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."

- Heather Ackerman

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

- Hector Flores

"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."

- Yolanda Garcia
Need Chimney Cleaning help in Concord? Licensed & insured · free written estimates
Call (833) 434-1221

Request a Free Estimate

Tell us what's going on in Concord. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7