Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Concord, CA
Most chimney calls we take in Concord start with an inspection, not a sweep. That’s because the housing stock here hides problems well: 1950s and 1960s ranch and Eichler-style homes in the Ygnacio Valley and Concord Heights often still have their original masonry fireplaces or mid-century inserts, and many of those flues are narrow creosote traps. Mild winters mean folks burn on and off from November into March, which builds glaze creosote faster than steady heating fires would. We inspect first, show you what we find on camera, then recommend only what the evidence supports. Call (833) 434-1221 to book.
Why Concord Homes Are Different
Concord sits in a sheltered inland valley with hot, dry summers and winters that rarely freeze. That climate shapes how fireplaces get used: short, smoky burns from November through March rather than a steady heating fire all season. Cool flues plus intermittent fires are exactly the conditions that accelerate creosote buildup, especially glaze creosote, which is harder to remove and burns hotter.
The housing adds a second layer. Much of Concord is mid-century single-family stock: 1950s and 1960s ranch tracts and Eichler-style post-and-beam homes, some with original masonry fireplaces and inserts, alongside 1970s and 1980s two-story stucco homes and newer infill. Many fireplaces here have clay-tile or cast-in-place flues that are undersized for modern inserts. Some older homes still have their first-generation prefab metal fireplaces, and in 1960s tract neighborhoods those thin, aging flue liners can corrode or separate without any visible symptom from the living room. A homeowner assumes the fireplace is fine because the winters are gentle. The camera often says otherwise.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Concord Services
Two jobs account for most of the calls we take from homeowners here: cleaning the flue and repairing what the inspection turns up.
Chimney Sweep in Concord
A sweep in Concord is mechanical, not a quick brush-and-go. We work the flue with rotary tooling sized to the liner, pull the creosote down and out, and follow with a camera look at the interior. In the Ygnacio Valley and Concord Heights, where original masonry fireplaces have seen years of intermittent winter burning, that camera pass is where we usually find the glaze and the cracked tile the eye can’t reach. We contain the dust, protect the hearth, and leave the box clean enough to use. To book a Chimney Sweep in Concord, call and we’ll set a time.

Chimney Repair in Concord
Concord repair work usually falls into three buckets: flue liners that have cracked or separated, caps and crowns that have weathered, and masonry that needs attention above the roofline. In the older prefab fireplaces common in 1960s tract homes, we often find liner corrosion that no one noticed because nothing looked wrong inside. Where the flue qualifies, we resurface with HeatShield’s ceramic system rather than jump straight to a full reline; where it doesn’t, we install a DuraFlex stainless liner matched to the appliance. For Chimney Repair in Concord, the same crew that inspects does the work.

Chimney Inspection in Concord
A chimney inspection in Concord is the step that tells you whether the fireplace you’ve been using is safe to keep using. It matters more here than in a lot of places because the housing and the burn pattern work against you: original masonry fireplaces and mid-century inserts in Ygnacio Valley and Concord Heights homes have narrow flues that trap creosote, and the region’s mild climate encourages short, smoky fires from November into March that build glaze faster than a steady burn would. Add 1960s prefab metal fireplaces with thin, aging liners that fail without a visible symptom, and a camera-based Chimney Inspection stops being a formality.
Fireplace Inspection
Signs you need it
You smell smoke in the room when the fire is lit, the damper sticks or won’t seal, or you’ve moved into a Concord home and have no record of when the fireplace was last looked at.
What it costs in Concord
A standard fireplace inspection typically runs $99 – $250 here, depending on what needs to be opened up and how far the camera work goes.
How we do it
We check the firebox, damper, smoke chamber, and cap, run a camera up the flue, and photograph what we find so you’re looking at the same evidence we are.
Level 2 Chimney Inspection
Signs you need it
A Level 2 inspection is the right call when a property changes hands, an appliance or liner is being swapped, or a chimney has been through a flue fire or a seismic event.
What it costs in Concord
Expect roughly $150 – $400 for a Level 2 in Concord, with the higher end tied to camera access, roof work, and how many flues are involved.
How we do it
We inspect every accessible flue and connected appliance, including the attic and crawlspace where reachable, video the interior, and document the findings in a written report.
What Chimney Inspection Costs in Concord
| Item | Typical range in Concord |
|---|---|
| Standard fireplace inspection | $99 – $250 |
| Level 2 chimney inspection | $150 – $400 |
| Camera inspection with photo report | $150 – $350 |
How often should a Concord chimney be inspected?
Once a year is the standard, and it fits how Concord burns: sporadic fires from November into March still leave creosote. If you use the fireplace heavily or burn unseasoned wood, book before the season starts. Call (833) 434-1221 for an exact quote – estimates are free.
Can an inspection find a problem a sweep would miss?
Yes. Glaze creosote, cracked flue tile, and separated prefab liners hide behind soot and sit past where a brush reaches. The camera shows them. Our technicians have up to experience reading exactly these interiors. Call (833) 434-1221 to schedule.
Brands We Service in Concord
We install and service professional-grade components from DuraFlex, HeatShield, Olympia Chimney, Famco, and Copperfield – the materials career chimney professionals specify rather than hardware-store substitutes. We don’t claim to stock parts locally; we source what the job needs. Most components arrive within a normal order window. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Concord, CA
| Service | Typical range in Concord |
|---|---|
| Standard fireplace inspection | $99 – $250 |
| Level 2 chimney inspection | $150 – $400 |
| Camera inspection with photo report | $150 – $350 |
| Chimney sweep | $150 – $350 |
| Chimney cap installation | $150 – $450 |
| Flue liner repair | $300 – $900 |
| Full stainless liner installation | $2,000 – $4,500 |
| Masonry and crown repair | $300 – $1,500 |
What pushes cost up in Concord is usually access and condition: a two-story stucco home needs roof work for a cap or crown, and an undersized clay flue behind a modern insert often needs the liner sized and installed rather than patched. Every price is set per job by a written estimate you approve before anything starts, and nothing gets recommended without camera evidence you can see.
Neighborhoods We Serve in Concord
We work across Concord, from the Ygnacio Valley and Concord Heights to the older tract streets near the center of town. Response timing depends on the day and the route, not on which side of the city you’re on – a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
- Ygnacio Valley
- Concord Heights
- Downtown Concord
- Concord Park
- Treat Boulevard corridor
Service Area – Cities Near Concord
Concord sits in the middle of a run of Contra Costa communities we cover, and the fireplace stock changes as you move through them. We work in Pleasant Hill, CA, just down the road, and in Contra Costa Centre, CA around the transit core. Farther out, we cover Walnut Creek, CA to the south and Bay Point, CA to the east. Call (833) 434-1221 to confirm we reach your street.
Serving Concord, CA – Our Local Coverage Area
We serve Concord and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Concord
Often yes, depending on the scope. Relining, structural masonry, and some cap work can require a permit from the city’s building department, while a sweep or inspection does not. We’ll tell you before work starts what applies to your job.
We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Bookings are scheduled by route and season, so the earlier you call ahead of burning season, the more choice you have. Call (833) 434-1221.
Some do, particularly around exterior caps and visible masonry changes on post-and-beam and Eichler-style homes. Check your HOA’s architectural rules before exterior work. We can describe the finished appearance and materials so you can submit a clear request.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Concord Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Heather Ackerman"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Hector Flores"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Yolanda Garcia