Chimney Repair in Concord, CA | Stallion Chimney Sweep

Chimney Repair in Concord - Inspected on Camera, Then Priced in Writing

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Trusted Chimney Repair for Concord Homeowners

When a chimney starts pulling away from the roofline, spalling brick across the yard, or letting water into the attic, you need a crew that can diagnose the cause and fix it, not a sweep crew handing you a list of upsells you can’t verify. That’s the gap we fill in Concord. Stallion Chimney Sweep handles inspection, sweeping, and chimney repair as one job done by one team, so the people who find the problem are the people who fix it. Our technicians have up to experience working with professional-grade materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, and Copperfield. Every repair starts with a camera inspection and ends with documented work. Same-day scheduling is often possible in Concord. Call (833) 434-1221 to book your estimate.

Call (833) 434-1221

Chimney Cap Installation

Chimney Cap Installation gives an open flue a proper cover: a metal cap on a screened base that keeps rain, birds, squirrels, and nesting debris out while still letting smoke and gases vent. You need one when a flue is uncapped, when the old cap is a flat plate with no screen, or when a wood-burning fireplace keeps drawing smells down on windy days. We fit Gelco and Famco caps sized to the flue and the crown, sealed so water runs off the lid instead of into the mortar. Installation in Concord typically runs $250-$650 depending on flue count, cap style, and whether we’re capping a single flue or a multi-flue stack. The written estimate sets the final price.

Gelco and Famco Caps Explained

Gelco and Famco both build caps for long exterior life, with finishes meant to hold up through wet winters and dry summers. We match the cap to the flue’s actual inside measurement rather than fitting a generic size and hoping it seals. A properly sized cap sits level, sheds water away from the crown, and still gives you a clear view of the flue during inspection.

When a Cap Is Not Enough

A cap protects the top of the flue, but it can’t fix a cracked crown underneath or a flue tile that’s already breaking up. When we find those during the same visit, we’ll show you with photos before recommending anything. Sometimes the cap can wait and the crown can’t, or the reverse.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Cap Replacement

Chimney Cap Replacement is the removal and re-fitting of a cap that has rusted through, lost its screen, blown loose in a storm, or been sized wrong from the start. You need it when the cap moves when you touch it, when birds get in anyway, or when rust streaks have started staining the crown and siding below. We pull the old cap, inspect the flue top while it’s exposed, and set a new multi-flue or single-flue cap from our Gelco and Famco line. Most replacements in Concord run $300-$750, depending on the number of flues and whether the crown needs patching at the same time. Call (833) 434-1221 and we’ll quote it in writing before any work starts.

Why Caps Fail Early

Cheap hardware-store caps tend to fail at the weld points and the screen, which is exactly where cheap steel is thinnest. A cap that’s bolted loosely also rattles in wind and lets water track down the outside of the flue tile. We set caps with a proper mechanical fit so the cap and the crown work together.

Inspection Included

Replacing a cap is a good moment to look down the flue with a camera, because the top is open and accessible. If the liner is cracked or the crown has a hairline split, you’ll see it on the screen while we’re still up there. We don’t recommend liner work off a guess.

Chimney Liner Installation

Chimney Liner Installation means fitting a new flue lining inside the old chimney to carry smoke and gases safely to the top. You need it when a clay tile liner is cracked, spalled, or missing joints, when a new insert or appliance needs a correctly sized flue, or when an older home still has an unlined chimney. We install DuraFlex flexible stainless steel liner systems for wood, gas, and oil appliances, sized to the appliance and insulated where the code calls for it. Full relining in Concord typically runs $2,500-$6,500 depending on height, flue size, insulation, and appliance type. The written estimate sets the final price.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (833) 434-1221

DuraFlex Stainless Systems

DuraFlex liners are flexible stainless steel, which lets us follow a chimney that isn’t perfectly straight without cutting into the masonry. They’re the same class of system career chimney professionals specify, not a hardware-store insert. We size the liner to the appliance so draft stays correct.

HeatShield as an Alternative

When the clay liner is deteriorating but still structurally sound, HeatShield ceramic resurfacing can restore the interior without a full reline. It’s a patented product applied to the flue walls, and the camera tells us whether a flue qualifies. If it does, we’ll say so, and if it doesn’t, we’ll explain why a liner is the right call.

Chimney Flashing Repair

Chimney Flashing Repair deals with the metal that seals the joint where the chimney passes through the roof, and it’s the fix that stops most chimney leaks. You need it when you see water stains on the ceiling near the chimney, rusted or lifted flashing, cracked tar patches, or daylight showing at the roof line. We remove the failed flashing, step new metal into the shingles and the chimney, and seal it against the masonry so water sheds away instead of soaking in. Flashing work in Concord typically runs $400-$1,200 depending on roof pitch, access, and how much surrounding roofing has to be opened up. The written estimate sets the final price.

Where Leaks Actually Start

Most “chimney leaks” aren’t the chimney at all. They start at the flashing, at the crown, or where a chase cover meets the top of a prefab. We trace the water path before we quote, so you’re not paying for a repair to the wrong part of the assembly.

Metal Selection and Fit

Flashing has to be cut and bent to the actual roof and chimney, not bent by hand on the spot and caulked over. We set metal that sheds water the way the roof does, with a proper kick-out where the joint meets a sidewall. Caulk alone is a temporary patch, not a repair.

Chimney Crown Repair

Chimney Crown Repair fixes the concrete cap that sits on top of the masonry and slopes water away from the flue. You need it when the crown has cracks wide enough to catch a fingernail, when pieces have broken off, or when the crown slopes the wrong way and water pools against the flue tile. We rebuild or resurface the crown with a proper slope and a sealed bond to the masonry, using materials made for exterior weather. Crown work in Concord typically runs $500-$1,500 depending on the crown size and how much demolition the old cap needs. We’ll show you the photos before you commit.

Cracks That Matter

A hairline crack in a crown isn’t automatically urgent, but a crack that opens and closes through the seasons lets water in every time it rains. Water that gets behind the crown works its way into the masonry below and shows up later as spalling brick. That’s the sequence worth stopping early.

Repair Versus Rebuild

Some crowns can be resurfaced in place; others have failed enough that a new pour is the honest answer. The difference comes down to how much of the original crown is still bonded and sound. We’ll tell you plainly which one you’re looking at.

Want to talk it through?Free estimate, price agreed before work starts
Call (833) 434-1221

Chimney Repair Companies

Chimney Repair Companies vary widely in what they’ll actually do and what they’ll hand off, which is why the single-company model matters here. Some outfits sweep and inspect but subcontract liner and masonry work; others sell relining before they’ve looked at the flue. At Stallion Chimney Sweep, sweeping, inspection, and repair are all done by the same team, with the same professional-grade materials, so there’s no gap between the diagnosis and the fix. Repair work in Concord ranges from a $250 cap job to a $6,500 full reline, and everything in between gets a written estimate first. Estimates are free.

What to Ask Before You Hire

Ask who actually does the repair, not just who inspects. Ask whether the company carries insurance and can show you camera evidence of the problem before you approve work. Ask what brand of liner or cap they intend to install, and why that product fits your flue.

Red Flags to Watch For

Be cautious with a crew that quotes thousands of dollars in liner work before anyone has run a camera down the flue. Be just as cautious with a sweep that finds nothing at all and never documents the visit. A real inspection produces photos you can see.

Chimney Masonry Repair

Chimney Masonry Repair is the structural side of the trade: rebuilding spalled brick, repointing mortar joints, and restoring the chimney body itself. You need it when brick faces are flaking off, when joints have eroded to where you can push a screwdriver in, or when the chimney leans away from the house or has visible gaps at the roofline. We repair the masonry with materials matched to the existing brick and mortar so the repair doesn’t look or behave like a patch. Masonry work in Concord typically runs $600-$3,500 depending on the extent, access, and whether a partial rebuild is needed. The written estimate sets the final price.

Spalling and Mortar Erosion

Spalling happens when water gets into a brick and pushes the face off as it dries or freezes. Eroded mortar is the same story at the joints: it crumbles and lets water deeper into the wall. Left alone, both move from a repointing job to a rebuild job.

Structural Movement

A chimney that’s separating from the house, or leaning, needs a closer look before any cosmetic work. We’ll evaluate whether the movement is at the flashing line, the footing, or the masonry itself. Cosmetic patching over a structural problem just hides it.

Brands We Service

We install and service DuraFlex flexible stainless steel liner systems, and we know where flexible liners wear, kink, or lose their connection at the appliance collar after years of heat cycles. We work with HeatShield ceramic resurfacing and understand which flues qualify for restoration and which need a full reline instead. Gelco and Famco caps and venting components are part of our regular work, and we’ve learned where those caps fail first, which is usually the fasteners and the screen, not the lid.

Olympia Chimney and Copperfield are the wholesale suppliers career chimney professionals source from, and we use their components because they hold up on exterior work. We’re not a dealer for any brand and we won’t claim to be. Whether you have Gelco, Olympia Chimney, Famco, Copperfield, or any other make on your chimney, we can help.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Need a price for your chimney cleaning?Free estimate, price agreed before work starts
Call (833) 434-1221

Signs You Need a Pro Right Now

  • Water staining on the ceiling or wall near the chimney. This usually traces back to flashing or the crown, and it gets worse with every rain. A camera inspection finds the source instead of guessing.
  • Spalling brick or crumbling mortar on the chimney face. The chimney is shedding material because water is getting in and working its way out. Repointing early is far cheaper than rebuilding later.
  • A strong smoke smell in the house when the fireplace isn’t burning. That’s often a draft problem or a blocked flue, and it can mean combustion gases are finding a path indoors. It deserves a look before the next fire.
  • A flue tile that’s cracked or missing joints. A damaged liner can let heat and gases reach the framing and masonry around it. A liner or HeatShield assessment tells you what’s actually needed.
  • A cap that’s loose, rusted, or missing its screen. An open flue invites water, birds, and debris straight into the chimney. Capping it is a small job that prevents larger ones.

Our Process, Step by Step

  1. 1
    Book the visit and confirm the scope. We ask what you’ve noticed (stains, smells, spalling, draft) so the technician arrives with the right tools. The estimate is free, and the price is set per job by the written estimate, never by a phone guess.
  2. 2
    Inspect with a camera before anything else. Every repair start with a look down the flue, at the crown, at the flashing, and at the masonry. You see the footage. If a flue looks sound, we’ll say so, even if that means less work for us.
  3. 3
    Show you what we found and what it means. We walk through the photos and explain which issues are urgent, which can wait, and why. Nothing gets recommended without evidence you can see for yourself.
  4. 4
    Quote the repair in writing. The estimate lists the materials (a DuraFlex liner, a Gelco cap, HeatShield resurfacing, new flashing, masonry work) and the scope, so you can compare it line by line. You approve before we order anything.
  5. 5
    Do the work and document it. The same team that inspected does the repair, and we photograph the finished work. That photo record is what makes the job warrantable and what protects you if anything comes up later.

How Much Does Chimney Repair Cost in Concord?

A typical cap installation in Concord runs $250-$650, a crown repair $500-$1,500, and flashing work $400-$1,200, all depending on access and the extent of the damage. A full DuraFlex liner installation runs $2,500-$6,500 for most homes here, driven by chimney height, flue size, insulation, and appliance type. Masonry repointing and rebuilds land between $600 and $3,500 depending on how much brick and mortar has to be replaced.

What moves the price: roof pitch and how hard the chimney is to reach, the number of flues, whether the appliance is wood, gas, or oil, and whether the old liner has to be removed before a new one goes in. Access is often the biggest swing factor. How to avoid overpaying: get a written scope, not a phone estimate, and ask to see the camera footage before approving any liner work. If a contractor can’t show you the problem on screen, don’t approve thousands of dollars of work. It’s also fair to ask which repairs can safely wait a season. Our free estimate includes the camera inspection, a photo record you keep, and a flat price agreed before we book the repair. Call (833) 434-1221 for an exact quote.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (833) 434-1221

Our Service Area Near Concord

We work throughout Concord and the surrounding East Bay communities, including Pleasant Hill, Walnut Creek, Clayton, Martinez, Pittsburg, Bay Point, Vine Hill, Saranap, and Contra Costa Centre. Dispatch is fast in the Concord area and the nearby towns, and scheduling is usually same-day when the calendar allows. For homeowners a bit further out, we also handle chimney repair in Pleasant Hill and chimney repair in Contra Costa Centre, with the same inspection-first process and the same written estimate.

Serving Concord, CA – Our Local Coverage Area

We serve Concord and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions About Chimney Repair in Concord

Schedule Your Chimney Repair Service in Concord Today

Call (833) 434-1221 to book your chimney repair in Concord. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get a free estimate, a camera inspection you can see for yourself, and a written price before any work starts. No obligation, no pressure, and a straight answer about what can wait and what can’t. Stallion Chimney Sweep handles the full scope, start to finish.

Written by the team at Stallion Chimney Sweep.

Why Concord Chooses Stallion Chimney Sweep

We set the standard for chimney repair in Concord.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Concord

Getting your chimney repair project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney repair project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Concord Customers Say

Trusted by homeowners across Concord and surrounding areas.

★★★★★

"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."

Heather Ackerman
★★★★★

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

Hector Flores
★★★★★

"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."

Yolanda Garcia

Ready for Chimney Repair in Concord?

Call now for a free estimate, or request one below. Licensed, insured, and ready to schedule your free estimate in Concord.

(833) 434-1221

Request a Free Estimate in Concord

Tell us about your chimney repair needs. We'll get back to you to set up your free estimate.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - We Answer 24/7