G

Gelco Chimney Cleaning Service in Concord, CA

Gas fireplace serviceGas fireplace service
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Why Concord Homeowners Choose Gelco Chimney Cleaning

Stallion Chimney Sweep provides independent Gelco chimney cleaning, service and repair in Concord, CA. We’re an independent service provider, not affiliated with, authorized by or sponsored by Gelco. What makes our Gelco work different is that we read Gelco-specific symptoms every week: condensation staining at gas insert vent connections, dampers that seize after Contra Costa summers, capacitor and fastener corrosion on caps. Every visit starts with a camera inspection and a photo report you keep, and the crew that inspects is the crew that repairs. Concord’s mid-century housing stock puts a lot of Gelco equipment in front of us, and we’ve learned its habits. Call (833) 434-1221. We answer 24/7.

Call (833) 434-1221

Why Trust Stallion Chimney Sweep for Your Gelco Chimney Cleaning?

Our technicians have up to experience working on the brands certified chimney professionals specify. Gelco caps, dampers, venting connectors and gas components have model-specific fit and clearance requirements, and we treat them that way. When we touch a Gelco cap or a gas insert vent connection, we use quality parts that fit the equipment and keep the installation within the clearances the appliance was built around. That’s what protects a warranty.

We’re an independent shop. We don’t claim Gelco authorization, we don’t call ourselves a dealer, and we don’t sell Gelco equipment as “sales & service.” We clean, repair, install and service it. If a part is structural or safety-critical, we’ll tell you plainly that it needs an OEM piece and let you decide. For cosmetic items like cap fasteners or crown materials, a quality aftermarket equivalent does the job and we’ll say so.

Concord homeowners get told a lot of things about their fireplaces. What they rarely get is evidence. Every recommendation we make is backed by camera footage of the flue and photos of the firebox, venting and cap. You see what we saw. When work can wait, we tell you it can wait. That’s the standard we hold on every liner, cap and repair.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Common Gelco Chimney Cleaning Problems We Fix in Concord

Gelco equipment fails in recognizable patterns. Here are the ones we see most often in Concord, and why they happen.

  • Condensation staining and rust at gas insert vent connections. A Gelco gas insert venting setup can pull cool, moist flue air into the connection, and that moisture condenses on metal. The result is a rusty streak at the firebox or liner joint and a smell that lingers after the fire is out. This is a venting seal and adjustment issue, not a cleaning problem, and it gets worse the longer it sits.
  • Seized dampers after a dry Contra Costa summer. Gelco fireplace dampers sit unused through hot, dry months. Linkages stiffen, pivot points dry out, and the plate stops seating. A damper that won’t close properly lets downdraft smoke into the room on a cold start and lets heated air escape all winter. Cleaning alone won’t free a seized damper; it needs to be worked, adjusted or replaced.
  • Loosened or corroded cap fasteners. Gelco chimney caps and multi-flue caps take decades of sun and interior-valley weather cycling. Fasteners back out, washers corrode, and the cap starts to lift or shift. Once it’s loose, rain gets into the flue and birds find the gap. A cap that’s only rattling often needs tightening and new fastening hardware; one that’s corroded through needs replacing.
  • Sooted gas logs and lazy orange flame. Gelco gas-log and insert burners soot up when the venting or air shutter has drifted out of adjustment. The flame goes soft and orange instead of clean and blue-tipped, soot collects on the glass, and the fire no longer burns the way it should. This is an adjustment and air-mix problem that a technician can diagnose and set correctly.
  • Narrow flues trapping glaze creosote. Concord’s 1960s tract homes often have first-generation prefab fireplaces and mid-century inserts with narrow flues. Most residents burn sporadically from November into March, short smoky fires in a cool flue, and that pattern builds glaze creosote faster than steady heating would. Mechanical sweeping and a camera inspection catch it before it becomes a chimney fire risk.
Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (833) 434-1221

Gelco Parts & Our Repair-vs-Replace Approach

We use Gelco OEM parts for structural and safety-critical pieces: dampers, caps, venting connectors and gas components. Fit and clearances on those are model-specific, and a near-fit part is a hazard, not a bargain. For cosmetic items such as cap fasteners or crown materials, quality aftermarket equivalents are fine and we’ll say so rather than mark up a part you don’t need.

Repair is usually the honest call on a sound Gelco firebox or insert. If the firebox is intact and the venting can be resealed and adjusted, repairing it is the right answer and it costs less. A cracked firebox or venting that has failed structurally often justifies replacement, and we’ll show you the footage that makes that case. We don’t have a stake in the bigger number.

If your Gelco fireplace has been giving you a soft flame or a smell you can’t place, call (833) 434-1221 for a free estimate. We answer 24/7.

Our Gelco Service Process – Step by Step

  1. 1
    Diagnosis. We inspect the flue with a camera, check the Gelco cap, damper, firebox and venting connections, and photograph what we find. You see the images before we recommend anything.
  2. 2
    Repair or install. If parts are needed, we match them to the Gelco equipment: OEM for dampers, caps, venting connectors and gas components, quality equivalents for cosmetic pieces. Installation stays within the appliance’s clearances.
  3. 3
    Test. We check damper travel and seal, confirm the cap sits tight with sound fasteners, adjust the air shutter on gas equipment and verify the flame burns the way it should.
  4. 4
    Warranty. Every job ends with documented, warrantable work. The crew that inspected is the crew that repaired, so there’s no hand-off and no conflicting diagnosis from a second contractor.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Want to talk it through?Free estimate, price agreed before work starts
Call (833) 434-1221

Gelco Products We Service & Install in Concord

We service and install Gelco gas fireplace inserts, direct-vent gas fireplaces, fireplace dampers and chimney caps, and wood-burning fireplace components. That covers the bulk of what Concord homeowners ask us about: a cap that’s lifted, a damper that won’t seat, a gas insert that’s venting badly, a wood-burning firebox that needs its flue scoped. Gas Fireplace Service, Damper Repair and Cap Replacement are the three jobs we’re called for most on Gelco equipment in Concord. We don’t stock Gelco parts or sell Gelco equipment, but we can service what you own with parts that fit it.

We Also Service These Brands

We’re multi-brand, not single-brand. Alongside Gelco, we install and service DuraFlex flexible stainless steel liner systems and HeatShield ceramic flue repair, and we work with Olympia Chimney, Famco and Copperfield products. That range matters when a Gelco cap sits on a flue with a DuraFlex liner, or a damaged flue needs HeatShield resurfacing before a new cap goes back on. One crew handles all of it, in Concord, without a hand-off.

FAQs – Gelco Chimney Cleaning Service in Concord

Book Your Gelco Service in Concord, CA

Whether it’s a Gelco cap that’s lifted, a damper that won’t seat, or a gas insert leaving soot and a musty smell, we’ll show you what we found and fix it with the right part for the job. Call (833) 434-1221 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Written by the team at Stallion Chimney Sweep.

Need Chimney Cleaning help nationwide? Licensed & insured · free written estimates
Call (833) 434-1221
Local Service Coverage

Request a Free Estimate in Concord

Tell us what you need - Stallion Chimney Sweep responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - We Answer 24/7